Privacy without the dark
Frosted film obscures what's behind the glass while still passing daylight, so a bathroom, an entry or a street-facing window stays bright and stays private — with nothing to open, close or dust.
Frosted, etched, patterned and gradient films for bathroom windows, front doors, glass partitions and conference rooms — the look of specialty glass, for a fraction of replacing it.
Why decorative film
Blinds solve privacy by taking the light away. Replacing glass solves it expensively, and usually means the window's out for a week. Film solves it in an afternoon.
Frosted film obscures what's behind the glass while still passing daylight, so a bathroom, an entry or a street-facing window stays bright and stays private — with nothing to open, close or dust.
Sandblasted and acid-etched panes cost several times what film does, and can't be changed once they're made. Film gives the same finish and can be peeled off and redone when the space changes.
Gradients, linear patterns, rain and textured finishes, and cut logos or lettering — a blank sheet of glass becomes part of the room rather than a hole in the wall.
Before & after
A corridor of glass-walled offices, glazed floor to ceiling. Solyx decorative frost film went on every pane: the offices keep their daylight, and the hallway can't see in.
Finishes
We're a Solyx dealer, so the choice runs from a plain white frost to textured and patterned finishes — and anything can be cut to a shape or a design.
The classic: an even white translucent finish that hides what's behind it and passes soft light. The usual answer for bathrooms, entries and office partitions.
Finer and slightly brighter than a standard frost, matching the look of acid-etched glass. Good where the glass is part of the architecture.
Stripes, bands and geometric patterns that break up a view without blocking it entirely — also the easiest way to make a full-height glass wall visible to anyone walking toward it.
Dense at the bottom and clear at the top, so you get privacy at eye level and keep the sky. Suits floor-to-ceiling glass and street-level windows.
The look of cast or rain glass, applied to a flat pane. We installed exactly this on interior glass at Emory — textured glass without replacing anything.
Your mark cut from frost or vinyl, or reversed out of a frosted band so it reads clear against the finish. Send vector artwork and we'll cut it.
Recent decorative work
Offices, clinics, entrances and bathrooms — all film on glass that was already in place.
A job we point at
Textured decorative film on interior glazing — the look of cast rain glass, without pulling a single pane out of its frame.
That's usually the argument for decorative film in an occupied building. Replacing interior glass means a glazier, a lead time, an opening standing empty and a bill per pane. Film goes on in place, in hours rather than weeks, and the room is usable the same day.
It also comes back off. When a tenant changes or a department moves, the film is stripped and replaced — the glass underneath is untouched.
Ask about your glass
Where it goes
Homes and offices both. Most jobs are a handful of panes rather than every piece of glass in the building.
Questions
What homeowners and facilities managers ask before committing to a finish.
No. Frosted film works by diffusing light rather than by reflecting it, so it obscures the view in both directions, day and night, lights on or off. That's the difference between decorative film and mirrored privacy film, which only works while it's brighter outside than in.
Not noticeably. A standard frost passes most of the light — it just scatters it, so you get brightness without a clear image. If you want to keep a view as well, a gradient or a patterned band gives privacy at eye level and leaves the rest of the pane clear.
Yes. We cut shapes, bands, patterns, logos and lettering from the film, or reverse them out of a frosted panel so the artwork reads clear. Send vector artwork — an AI, EPS, PDF or SVG file — and we'll work from that.
Yes. Decorative film is removable, and the glass underneath is unchanged — which is the main reason tenants and departments choose it over etched or replaced glass. We can strip and re-cut it when the space changes.
Yes — these films are made for interior glass in everyday conditions, including bathrooms and kitchens. Clean them like glass with a soft cloth and a non-abrasive, ammonia-free cleaner.
Decorative films are chosen for appearance and privacy, not performance. If the same glass is also overheating a room, that's a solar film job — and on many windows both can be specified so each pane does what it needs to. We'll sort that out at the consultation.
Free consultation
Send a note about the windows, doors or partitions you want covered and we'll come look, bring samples of the finishes, and price it. Photos help if you have them.