Stop the heat. Keep the window.

Solar film filters the part of sunlight that carries heat and leaves most of the part you actually want. Which film does that best depends on your glass — so this page explains how the choice is made, not just what it fixes.

  • 97% Of infrared heat rejected
  • 99.9% Of UV rays blocked
  • 3 Film lines to specify from
  • Lifetime Warranty on bubbling & peeling

How it works

Sunlight isn't one thing.

What comes through your glass is roughly half infrared, which you feel as heat, a little under half visible light, which you want, and a few percent ultraviolet, which fades everything. A good solar film treats them separately.

Infrared — the heat

Invisible, and the reason a sunny room feels like an oven. High-performance films reject up to 97% of it. That's the number that decides whether a room becomes usable in August.

Visible light — the view

The part you're paying for when you buy a window. Older films cut heat by cutting this too, which is why "tinted" used to mean "dark". Modern films don't have to work that way.

Ultraviolet — the fading

A few percent of the energy and the largest single cause of faded floors, rugs and art. Nearly every film we install blocks 99.9% of it, including the clear ones.

Reading a spec sheet

Four numbers, and what they're worth.

Every film has a data sheet. If a quote doesn't mention these, it isn't really a specification — it's a price for a roll.

Visible light transmission (VLT)

How much visible light passes through — a percentage. A 70% VLT film looks close to clear glass; a 15% film is obviously dark. This is the number that decides how the house or building looks, and it's the one to fix first, because everything else gets specified around it.

Higher = brighter, closer to bare glass

Total solar energy rejected (TSER)

The honest performance number: the share of the sun's total energy the glass plus film sends back. Infrared rejection figures sound bigger because they only count one band. When you're comparing two films, compare TSER.

Higher = cooler room

Glare reduction

How much of the visible brightness is cut. It tracks VLT closely, and it's what matters for screens, TVs and the low sun that comes through a west window at 5pm — a room can be cool and still be unusable from glare.

The screen and the sunset test

Reflectivity, inside and out

Two separate figures. Exterior reflectivity decides whether the building looks mirrored from the street. Interior reflectivity decides whether you see your own living room in the glass after dark — the thing people notice and hate about cheap film.

Low interior reflectivity for homes

Residential window tinting Commercial window tinting

Which family fits

Same problem, four kinds of film.

Being authorized for 3M, LLumar and Solyx means we pick from all of these rather than fitting your glass to the one line we carry.

  • Spectrally selective. Multi-layer films that separate infrared from visible light, so you get high heat rejection at high clarity. 3M's Prestige series is the example most people have heard of.
  • Dual-reflective. Reflective outside for heat and daytime privacy, low-reflective inside so the glass doesn't mirror the room at night. The usual answer for west-facing walls of glass.
  • Neutral & clear UV. Little or no change to appearance, aimed at UV and fade protection. What we put on historic homes and anywhere the glass must look untouched.
  • Insulating (low-E) films. Add heat rejection in summer and cut heat loss through the glass in winter — worth considering where windows are the weak point year round.
Ask which one fits your glass
Sunlit glass curtain wall on a commercial building after solar control window film installation
Solar film on a curtain wall elevation in Metro Atlanta

Where it earns its keep

Glass that takes the sun

Nearly always the west and south elevations first. Filming glass that never sees direct sun is money we'll talk you out of spending.

  • West-facing living rooms
  • Sunrooms & conservatories
  • Two-story great rooms
  • Bonus rooms over garages
  • Kitchens & breakfast nooks
  • Home offices
  • Office curtain wall
  • Storefront glazing
  • Atria & lobbies
  • Hotel guest rooms
  • Classrooms
  • Skylights & roof glazing

Questions

Solar film FAQ

The ones worth asking before anyone quotes you a film.

Does a darker film always mean a cooler room?

No — and this is the most useful thing on this page. Darkness is visible light; heat is mostly infrared. A modern spectrally selective film can look nearly clear and still reject more total solar energy than a cheap dyed film that makes the room gloomy. Compare TSER, not shade.

How much will it cut my power bill?

We won't give you a percentage, because anyone who does is guessing. It depends on how much glass you have, which way it faces, your insulation, your HVAC and how you use the rooms. What we can say honestly: film reduces the solar heat coming through the glass, so the air conditioning runs less to hold the same temperature, and the difference is biggest on houses and buildings with a lot of sun-facing glazing.

Does solar film help in winter?

Standard solar films are a summer product — in winter they'll also reject some of the solar heat you'd have welcomed. Insulating low-E films are the ones designed to cut heat loss through the glass in cold weather. If year-round performance matters, say so and we'll specify for it.

Can film go on low-E or double-pane glass?

Often, but not any film. An insulated unit's seal can be stressed if the glass absorbs too much heat, and the window manufacturer's warranty may set conditions. We check the glass type and the warranty before quoting, and choose a film rated for it.

Will film interfere with phone or Wi-Fi signal?

Metallized films can affect signal through the glass. Non-metallized films — including 3M's Prestige series — don't, which is one reason they're specified in homes and offices where that's a concern. Tell us if it matters and we'll keep to those.

How long does solar film last?

Professionally installed architectural film on interior glass lasts many years — the manufacturers back it with their own warranties, and we add a lifetime warranty against bubbling, peeling and cracking. Cheap film installed badly is what discolors and delaminates within a few seasons.

Free consultation

Which room is too hot?

Tell us which glass is the problem and which way it faces. We'll come out, measure the openings, show you samples on your own windows and give you the numbers for the film we'd recommend.

Request your consultation

We'll get back to you the same business day. No spam, no call lists.